The Head Wears Out. The Mop Does Not.

Chenille flat mop with a replaceable stick-on head - 40cm head, 38cm plate, 67-120cm handle

A flat mop built so that the part which wears out is the part you can replace. The chenille head presses onto the plate and lifts off again, so a worn or soiled head is swapped in seconds instead of the whole mop being thrown away. The handle extends from 67cm to 120cm, and the same head is used wet or dry.

Key Features

Replaceable stick-on head - the part that wears is the part you replace

Chenille surface with a microfiber face for picking up dust and moisture

One head for both wet and dry work

Handle extends from 67cm to 120cm

40cm head on a 38cm plate for wide, even passes

Supplied in bulk to distributors, janitorial suppliers and contract cleaners

A Replaceable Head Changes What the Mop Costs You

The head is the part of a mop that wears. The pile flattens, the fibres hold what they have picked up, and eventually the mop is thrown out while the plate and the handle are still perfectly sound. With a stick-on head, the worn part is the part you replace.

The head presses onto the plate and lifts off again, with no clips to line up and no tools. That makes three things practical that are not practical with a fixed head:

Swap the head when it is worn, instead of replacing the mop

Change heads between areas, so soil from one part of a site is not carried into another

Take the head off to dry, rather than leaving the mop standing damp on its plate

Chenille Surface, Microfiber Face

The head is chenille with a microfiber face. The tufted chenille surface stands proud of the backing, so it works into the texture of a floor instead of skimming across the top of it. The microfiber is what takes hold of the dust and the moisture the head passes over.

That combination is what lets one head do both jobs: dry passes for dust and hair, wet passes for spills and marks.

Wet and Dry on the Same Head

Dry first, to take up dust, hair and grit before any water is introduced. Then wet, for spills, marks and the general wash. Because the head comes off, a head used for wet work can be lifted off the plate and hung to dry rather than sitting damp in the corner.

One mop covers both passes. That removes the need to keep a separate dry mop and wet mop on the trolley for a typical hard-floor round.

Handle Extends 67cm to 120cm

The handle is telescopic, so the working length is set by the sliding sections. At the short setting it is a compact everyday mop for kitchen and bathroom floors. Extended towards 120cm it reaches the back of a room, along skirting boards, and under beds, sofas and low units, without the operator having to crouch or bend.

A 40cm head on a 38cm plate takes a wide pass, which is what keeps the number of strokes down on a large floor.

What Is in the Set

Where It Gets Used

Designed for hard floors. The plate stays flat against the surface, so the head keeps contact across its full width.

Ordering & Customisation

Colour - lake blue as standard; other colours on enquiry

Logo - tell us your requirement and we will confirm

Heads - additional heads can be ordered with the set

Packaging - set up to your requirement

MOQ, sampling and lead time - tell us your quantity and we will quote it

Product Information

Frequently Asked Questions

How does the replaceable head attach?

The head presses onto the plate and lifts off again, with no clips to line up and no tools. When it is worn or soiled, it is swapped for another head.

Can the same head be used wet and dry?

Yes. Dry passes take up dust, hair and grit; wet passes handle spills and marks. Because the head comes off, it can be lifted off the plate and hung to dry afterwards.

How long is the handle?

The telescopic handle extends from 67cm to 120cm, so the working length can be set for everyday floor work or extended for reaching under furniture and along skirting boards.

What size is the head and the plate?

A 40cm head on a 38cm plate. The wide pass keeps the number of strokes down on a large floor.

What is the head made of?

Chenille with a microfiber face. The tufted chenille surface works into the texture of the floor, and the microfiber takes hold of the dust and moisture it passes over.

Is it suitable for commercial cleaning?

Yes. It is used on hotel rooms and corridors, offices, restaurant and canteen floors, and on contract cleaning rounds. Because heads can be changed between areas, a site can keep one head per zone rather than carrying soil from one area to the next.

Can the head be washed?

Please confirm your requirement and we will confirm what we can supply.

Can we order spare heads with the mop?

Tell us the quantity and we will confirm what can be supplied with the set.

Do you make other colours or print our logo?

Lake blue is the standard colour. Tell us the colour and logo you need and we will confirm what we can do.

What is the minimum order quantity?

Please send your quantity and we will confirm the MOQ for the option you need.

Can I get a sample before placing a bulk order?

Yes. Send us your requirement and we will confirm the sample arrangement.

How long does production take?

It depends on the quantity and the customisation you choose. Tell us your target date and we will confirm it with the quotation.

How is the set packed?

Packing can be set up to your requirement.

Do you supply distributors and private label?

Yes. We supply distributors, janitorial suppliers and contract cleaners, and we run private-label programmes. Send your target market, target price and artwork and we will come back with a quotation and a sample plan.

Send Us Your Quantity and Target Market