Towel Mop Head Manufacturer & Supplier

Towel Mop Head Manufacturer & Supplier
Product Introduction:
Microfiber strip mop heads built for daily commercial mopping — dense terry strips, reinforced stitching, and a screw-thread socket that locks onto the handles you already stock. Available in 80/20 polyester-polyamide or 100% polyester, with custom colors, weights and branding.
Send Inquiry
Description
Technical Parameters

Towel Mop Head Manufacturer & Supplier

Microfiber strip mop heads built for daily commercial mopping - dense terry strips, reinforced stitching, and a screw-thread socket that locks onto the handles you already stock. Available in 80/20 polyester-polyamide or 100% polyester, with custom colors, weights and branding.

80/20 Polyester-Polyamide 100% Polyester Option Screw-Thread Socket Custom Color Coding

Microfiber towel mop head with pink terry strips and red plastic screw-thread socket

A Mop Head That Survives the Warehouse, Not Just the Unboxing

Most mop heads fail the same way: the strips tangle into a rope after two weeks, the stitching gives out under a wringer, or the head sags heavy when saturated. This towel mop head is built around those failure points. The terry microfiber strips are double-stitched to a reinforced center band, so the head keeps a flat, even spread against the floor instead of clumping.

The plastic screw-thread socket is molded rather than glued, which is what stops the head from loosening mid-pass. And because the strips are cut to a consistent weight, the head absorbs the same volume every cycle - predictable enough to schedule by, not guess at.

Key Features

01

Reinforced Strip Stitching

Double-stitched terry strips resist pull-out at the center band, the point where budget heads split first.

02

Anti-Tangle Ribbed Strips

Ribbed strip structure keeps the loops separated during wringing, so the head does not knot into a single mass.

03

Molded Screw Socket

Threaded plastic socket screws onto standard round handles and locks without wobble or slip during a full pass.

04

Even Water Release

Dense microfiber strips hold water and release it evenly, reducing passes per square metre and standing water.

05

Machine Washable

Washable without bleach; strips keep shape and absorption across repeated industrial laundry cycles.

06

Color-Coded Systems

Color coding supports HACCP-style zone separation between food areas, washrooms and general floors.

Specifications at a Glance

Material options 80% Polyester / 20% Polyamide blend, or 100% Polyester microfiber
Construction Terry microfiber strips sewn to a reinforced center band, ribbed surface, hemmed strip ends
Socket / connector Molded plastic screw-thread socket, fits standard round mop handles; thread size confirmed per order
Strip length & head weight Customized to buyer specification - confirm target strip length and gram weight per piece before production
Color Standard and custom colors; color-coded sets for zone management
Care Machine washable, bleach-free, air dry; reusable across many cycles
OEM / ODM Custom color, strip weight, packaging, private label and logo
MOQ & lead time Quoted per specification and order volume - send requirements for an exact figure

Specification sheet, material certificates and pre-production samples are available on request.

Which Material Should You Choose?

The choice between an 80/20 blend and 100% polyester is not about one being better - it is about where the head will be used and what your buyers are willing to pay for.

80% Polyester / 20% Polyamide

Softer hand feel and denser loop structure

Releases water more evenly - better for polished floors

Higher resilience after repeated washing

Preferred for hotels, hospitals and retail floors

Higher unit cost, positioned as the premium SKU

100% Polyester

Lower raw material cost, better entry-level pricing

Fast wetting and strong pickup on light soil

Adequate durability for high-frequency replacement cycles

Preferred for contract cleaning and volume channels

Best fit where the head is treated as a consumable

Both grades are produced on the same strip line and go through the same stitching and socket molding, so the difference is the fiber, not the workmanship.

Compatible With the Handles You Already Sell

A mop head is only as good as its attachment point. The socket on this head is a molded plastic screw-thread design - the head turns onto a standard round handle and tightens by hand in a few seconds. No adapter, no clip to break, no head spinning loose halfway across a floor.

If you supply handles in more than one market, tell us the thread specification you need and we will match it before production. This is the single most common reason a shipment gets rejected on arrival, and it costs nothing to confirm up front.

Customization & OEM

Because the strips, the center band and the socket are produced in-house, customization happens at the source rather than through a repackaging step.

Color Custom dyed strips, including color-coded sets for site zone systems
Strip length & weight Cut to the length and gram weight your market expects
Socket thread Matched to your handle supplier's specification
Packaging Poly bag, header card, printed carton, retail-ready sets
Branding Private label, woven label, logo print, barcode and hangtag

Where These Mop Heads Are Used

HospitalityHotel corridors, lobbies and guest bathrooms HealthcareWard floors and clinical zones with color-coded separation Food serviceKitchen back-of-house and dining floors under HACCP zoning RetailSupermarket aisles, entrance matting and checkout floors
Facility servicesContract cleaning rounds and janitorial supply IndustrialWarehouse aisles, workshop floors and loading bays EducationSchool halls, canteens and campus buildings ResidentialHousehold wet mopping and retail refill packs

Why Buy Direct From the Manufacturer

01

Spec Changes Before Production

Strip weight, color and socket thread are set at the line, not negotiated through a middle layer.

02

Consistent Repeat Orders

The same fiber, strip weight and stitching standard run after run - so batch two matches batch one.

03

Direct Quality Accountability

One party owns the fabric, the stitching and the socket. Fewer handoffs means fewer places for a defect to hide.

Frequently Asked Questions

What material is this towel mop head made of?

It is available in two microfiber options: an 80% polyester / 20% polyamide blend for softer hand feel and better water release, or 100% polyester for cost-effective everyday use. Both hold color through repeated washing.

Will this mop head fit my existing mop handle?

The head uses a plastic screw-thread socket that fits standard round mop handles. It screws on by hand in seconds and locks without wobbling, so you do not need to change your current handle stock.

How absorbent is the towel mop head?

The terry microfiber strips absorb many times their own weight in water and release it evenly across the floor. That means fewer passes per area and less standing water left behind.

Can the mop head be machine washed and reused?

Yes. It is machine washable and reusable. Wash in cold or warm water without bleach, air dry, and the strips keep their shape and absorption through many cycles.

Do you offer custom colors, sizes and OEM branding?

Yes. We support custom strip length, head weight, color coding, packaging and private label. Send us your specification and target quantity, and we will confirm pricing and lead time.

 

Hot Tags: towel mop head manufacturer & supplier, China, manufacturers, suppliers, factory, price, 360 Spin Mop Refill, Microfiber Loop Mop, Microfiber Mop Refill, Mop Connector, Mop Handle, Towel Mop

Send Inquiry